Archive for the Category » Home Improvement «

January 09th, 2018 | Author:

Going green at home is much easier than you might think. While you can swap out your water heater and choose a smart thermostat, you can also start smaller and make some basic changes in your kitchen first. The kitchen in most homes is where people spend time together and where they both cook and eat. No matter how much time you usually spend in that room, you can use a few tips to make your kitchen a little greener before focusing on other areas of your home.

Eliminate Paper Towels

Every time that you use a paper towel to wipe up a spill or as a makeshift napkin at meal time, you waste paper. Paper towels come from trees that manufacturers cut down too. You can use simple rags to clean up spills like reclaimed wiping rags immediately. Cloth is much more absorbent than paper towels are and can go right in your washing machine for fast and convenient clean up. Keeping a few extra sponges on hand is helpful too. A simple zap in your microwave will both clean and disinfect used sponges.

Start a Compost Bin

If you do any gardening outside, you should seriously consider starting a compost bin to make use of the food scraps left behind by your family. All you need is an airtight container. Place this container inside a cabinet under your sink. At the end of each meal, put the scraps leftover in the container before tightening the lid. Once you fill the container, you can take it outside and use that compost on your garden. If you have raw scraps like vegetable peelings leftover, you can put those pieces in a bag in the freezer and use the food to make stocks later.

Start Recycling

Recycling is one of the best things you can do to make your kitchen and your home greener. You can start out small with just one bin that you place next to your garbage can. Use that bin to store things that you can recycle like old newspapers, aluminum cans and glass or plastic bottles. If you find that your family has a lot of things that you can recycle, you might add multiple bins for different materials. Using one or more of these tips can help you make your kitchen greener and more environmentally friendly before you work on other parts of your home.

November 05th, 2016 | Author:

If you are a homeowner, there will likely be a time when you decide to undertake a remodeling project. Once you have made that decision, you may find yourself feeling somewhat overwhelmed by all the details that require your attention. Before you panic, you might pause, refocus your thoughts, and look for places where you can find the help you need to get your project started on the right track. By visiting sites like, you can find contractors today that are highly qualified and can do the job right.

Increase Your Home’s Value

Remodeling can increase your home’s worth by an amount far greater that what you spent on the remodeling project itself. If you think you might want to sell your home within the next few years, your remodeling project can actually become a profit-making endeavor because of the gain in value you will be able to enjoy. This is in addition to the intangible benefit you get by enjoying your home more while you are living there.

Adding Space

There are a number of ways you can add living space to your home through remodeling. You can always expand the square footage footprint by adding one or more rooms to the main floor. This, of course, assumes you have the yard space that you are able or willing to sacrifice in order to gain more indoor living space.

If your house has an unfinished basement, you can gain living space without expanding the footprint by converting it into one or more additional rooms. Basements are often converted into family rooms, extra bedrooms, offices or workshops with tremendous success.

Energy Efficiency

In many cases, remodeling can save you money in the long run by making your home more energy efficient. This is especially true if you live in an older home. Many older houses were constructed when energy was cheap and things like good insulating material were not available. Consequently, energy efficiency was not a major concern when these houses were designed and built. Today’s technology allows for the use of more energy efficient appliances and much better insulation in the structure itself.

There are many other reasons you might want to consider remodeling your home. It may be that you simply want to keep it from becoming outdated. Whatever the reason, a good contractor can give you tips on how you can make maximum use of what you have.

Category: Home Improvement  | Tags:  | Comments off
September 09th, 2016 | Author:

Thermal curtains are more suitable for room temperature control than vertical blinds. The insulating features of thermal curtains make them a popular addition in many homes. However, several techniques can help make vertical blinds more energy efficient.

How Insulation Works
Air has excellent insulation properties. Air trapped between two layers of vinyl or fabric provides better insulation than the same air trapped between a single layer of vinyl or fabric. Therefore, window treatments containing more than one layer are better insulators than those with a single layer. The more the number of layers in a window treatment, the better insulation they provide.

R-Value: Measurement for Insulation
The ability of an object to resist heat flow is referred to as R-value. Items or objects with higher R-values provide better insulation and vice versa. Most insulation materials used in today’s homes have R-values of more than 40. However, it is important to know that not all window treatments have a rated R-value.

What Makes a Blind a Good Insulator?
Window blind’s R-values are influenced by two main features. Firstly, additional layers translate to more insulating ability. Blinds that have vanes with pocket air in the middle will insulate more than vertical blinds made of a single layer of fabric or PVC vinyl. Another feature that affects R-value is the tightness that the blind has against the window.

What Makes a Curtain a Good Insulator?
Just like window blinds, the R-value of a curtain is determined by the quality of the fabric a thermal curtain if made from and the number of layers it has. Most thermal curtains have several layers and are therefore, good insulators. Another factor that affects curtain insulation is its window fitting. The curtain’s ability to sufficiently insulate a room is lowered by the presence of gaps around the edges of the window. Consider choosing curtains that fit perfectly around the sides of your windows. Window draperies and quilts can hold an R-value of between three and five.

Other Factors
Heat may be lost in a room due to poor insulation of doors and windows. Weather stripping and caulking can help reduce this problem. Single paned windows have less insulating values than double paned windows. Insulating blinds and louvers can enhance insulation in a room, but cannot stop air from leaking into or out of a room. This can only be solved by weather stripping or caulking.

Category: Home Improvement  | Tags: ,  | Comments off
June 07th, 2016 | Author:

If you’re like most homeowners, the idea of starting a renovation project in your home puts some serious fear into you. We’ve all heard the crazy stories about projects that never end, and obviously, you don’t want to be included among their ranks.

However, renovating your home is really the only way to get the house you’ve always dreamed of. While it can seem like a painful process, there are also some beneficial ways you can ensure that you don’t end up in the middle of a project that’s gone completely off the rails.

Use this guide to learn more about renovating your home on a budget and how you can do it without losing your sanity in the process.

Interview Multiple Contractors

Finding a contractor to help you with a home renovation project can be a daunting task for the average homeowner. That doesn’t mean you should just pick the one who helped with that small project 10 years ago, or the one that your neighbor said did decent work.

Always take the time to interview at least two contractors. Ideally, you should look to at least three to four if you want the best balance of quality work and an affordable price.

Always Get Bids

When you’re dealing with contractors, it can be easy to just pick one and go with whatever quote they give you. After all, they’re professionals, and most professionals charge pretty competitive prices, right?

Not all contractors do, and some may be out of your price range. Whenever you’re considering working on a home renovation project, take the time to get multiple free estimates from general contractors in your area.

It’s worth the extra time to potentially save yourself thousands of dollars.

Know Your Needs

A lot of homeowners dream of renovations that include everything from a home office to that listening room and home theater they have always wanted. While that’s nice to fantasize about, expectations that get out of control can lead to disappointment when the renovation actually happens.

Figure out what you really need in a renovated home and stick with the basics. If you have the budget, add creature comforts or amenities that you will truly use. Take the time to figure out if you’re just imagining your needs or if you really know you need that home office and theater.

Category: Home Improvement  | Tags: ,  | Comments off
May 20th, 2015 | Author:

Medical equipment isn’t finished until it’s been coated. Injection moldings aren’t done until they’ve been exposed to a vacuum coating or sputtering machine. But what if you’re new to the world of industrial coating? What do you need to know before hiring a company to do it for you? Here are just a few tips.

1. Look for Experience

You don’t want to be a company’s first customer. This goes for any business, but it’s especially true for industrial coating services. You can’t afford to be someone’s learning curve when thousands of dollars of equipment are on the line.

2. Find a Specialist

Instead of hiring a “jack of all trades” that handles multiple types of coating, look for someone with skill and experience in a particular field. For example, if you’re in the metal cutting business, look for companies that deal exclusively with steel.

3. Know Your Limits

Are you under a particular budget? Does your coatings need to be finished in time for a grand opening in six weeks? Make sure you’re upfront with the company about job requirements. If they can’t do it, it’s better to know in advance so you can make other plans.

These are just a few things to keep in mind when looking at thermal evaporation or vacuum coating services. Don’t be afraid to take your time and do your research before making a decision. If you don’t want to ruin your equipment, you’ll want to hire the right company the first time.

Category: Home Improvement  | Tags:  | Comments off
November 05th, 2014 | Author:

No one wants to be out when it’s cold. This is especially true if there is a considerable amount of snow outside. When the weather gets particularly wet, it can be difficult and outright dangerous to venture outside. Whatever can be done to get the home ready for the colder months ahead of time is important. Take care of things now while there is still a chance. The rain and snow will quickly set in if it hasn’t already.

Homes with basements need to ensure that they are equipped with efficient sewage pumps. A home that gets flooded can have substantial problems. Not only can the home become damaged by a flood, but a flood poses a huge risk to any of the home’s occupants. People face possible electrocution from a basement that is flooded. Having an efficient sewage pump is vital to ensuring a home’s structural integrity, preservation of possessions and home occupant safety.

If a homeowner has a fireplace, it’s important to get a large stack of wood before it rains and snows. Gathering wood and cutting it is hard work, but that hard work is amplified when there is snow and rain outside. It’s also important to keep wood in a dry place that’s off of the ground.

There are other things that can be done to prepare for winter. For instance, placing plastic wrap on the windows can help to preserve the heat in the home and can prevent the cold from entering as well. Get ready before it gets cold.

Category: Home Improvement  | Tags:  | Comments off
July 05th, 2013 | Author:

Doesn’t it always seem like you need a furnace repair in Indianapolis at the most inconvenient times? The furnace always tends to break down when you are about to have family stay over or you planned a big party at your house. Even if you do have a furnace issue, you can rest at ease because the most common furnace problems don’t actually take a huge amount of time to fix.

Not Enough Heat

If you turn up your heat, but your home still feels cold, you may have a furnace issue. Before you call a heating expert, check your air filter. The air filter can fill up will dust, pet hair, and other airborne substances that will clog it up. By replacing your filter, you may find that you have fixed the problem yourself.

Another common issue when you don’t have enough heat is damaged duct work. You can inspect the ductwork to see if there are holes or if the seams are coming apart. You should leave this type of repair to the professionals so that you can fix the problem permanently.

No Heat

Are your teeth chattering as you try and figure out why your furnace is broken? To prevent the heat from completely shutting down, it is a good idea to have your furnace undergo yearly maintenance so that issues can be fixed before it’s so cold in your house you could make an igloo.

Before you call a serviceman, you should check your breaker to make sure that there is energy going to the furnace. If you have the power on, you should call a professional. A common problem when the furnace simply won’t turn on is an inhibited or closed valve. Opening the valve can potentially be dangerous without proper training, so you should call a professional if the heat doesn’t come after you checked the power source.

Too Much Money

If your energy bill is through the roof during the winter, you may be in need of a furnace repair. As furnaces age, they tend to be less efficient. If your furnace is more than 15 years old, you may have to consider a replacement.

The best way to know if your furnace still has life in it is to contact your experts in furnace repair in Indianapolis. They will help get your furnace running or help you decide if a new furnace is in your future.

Category: Home Improvement, Services  | Tags: ,  | Comments off
July 05th, 2013 | Author:

If you are looking to have a driveway installation in Fort Worth done, then you have some things to consider before hiring someone to do it. They can do installation, or they can do repair work if that is possible. You’ll want to find a company that can do either one, just in case you can just have it repaired rather than totally reinstalled. You also want a company that you can trust with your money, property, and time. You want someone that will respect you and your assets as well as someone that will be honest and upfront with you. And if you are looking to have your concrete stained to be a certain color, or decoratively stamped, then you will need someone who does that.

Services Available

There are so many different things that can be done to concrete now to achieve virtually any type of texture, color, or design. It’s exciting, yet can be hard to find someone who is able and willing to do what you’d like done. Therefore, finding someone who has been taught and has lots of experience with these techniques can be very useful, depending on what you are looking for. Another great service is that they mix concrete on site. When they do this, it saves concrete, and will usually save you time because they won’t charge you for any concrete that they’d pre-mixed but didn’t end up using. Plus if they end up needing a different type of concrete, they can change that immediately when they do it all on-site.

Company Profile

And of course, when you are looking for a company to do your driveway installation in Fort Worth, it is important you find someone who can be trusted, is respectful, and is honest. These things will make your experience much better as you will walk away feeling like a valued customer by a great company. You’ll want someone that respects your time, money, and property and that you can trust with these things. When you find a company that does that, you’re all set to have a great experience.

Category: Home Improvement  | Tags:  | Comments off